The integrated ∪-type progressive oil distributor can be used in medium pressure and wide temperature change conditions. It can form a single-line lubrication system with manual, electric, pneumatic pumps, etc. It is used for various small machine tools and plastic machinery equipment, or a sub-distributor of a large single-line lubrication system.
A typical set of U-type distributors can usually provide lubrication for 4, 6, 8, 10 or 12 lubrication points. The U-type distributor has only one displacement specification of 0.3mL/cyc. Note that for the oil outlet of the distributor, any oil outlet cannot be blocked to affect its normal operation, otherwise the distributor will be damaged.

Specification

1. Maximum nominal pressure: 15MPa
2. Standard displacement: 0.3mL/cyc
3. Lubricant range (at standard temperature): Lubricating oil ≥ N68, grease NLGI 000#~1#
4. Working environment temperature: -10℃ ~ +60℃
5. Max circulation rate of plunger pair of mechanical cycle indicator: 60cyc/min
6. Max circulation rate of plunger pair: 200cyc/min
7. Number of lubrication points: 4, 6, 8, 10, 12
8. Pipeline length: Φ4/0.5~2.5m, Φ6/1.2~3.5m
9. Valve body material: aluminum alloy

Principle

U-shaped is a progressive distributor that delivers a certain amount of grease from each working plunger in the valve body to the lubrication points in a specified sequence. Each working plunger pair delivers quantitative grease to the lubrication point based on the principle of hydraulic force generated by progressive action. In order for the distributor to have a constant output, the U-shaped distributor must be supplied with grease with a certain pressure. Otherwise, the working plunger pair will not deliver the grease to the lubrication point in a progressive manner in the specified sequence. . In the same way, once the supplied pressure grease stops flowing, the working plunger pair of the distributor will also stop moving. Only when the pressured grease starts to flow in the valve body again, each working plunger pair in the distributor will repeat its oil filling cycle working process at the same point.

Manuals

1. Pressurized quantitative metering valve, a direct pressure action type.
The pressure oil delivered by the pump pushes the piston built into the metering valve to move, forcing the quantitative lubricant to be discharged.
When the pump stops working, the piston of the metering part is reset under the action of the spring force, that is, the quantitative lubricant is stored.
2. Accurate discharge, the metering part is discharged only once in one cycle, and the distance between each other in the system, whether it is far, near, high or low, horizontal or vertical installation, has no effect on the discharge.
3. Forced discharge, sensitive action. Two seals are used to prevent the discharged from flowing back.
4. Metering valves can be selected based on the needs of each lubrication point, and can be used in combination with the MGJ junction, either in series or parallel.
5. Sleeve type: Φ4 nylon tube needs to be combined with PA-4 joint and PB-4 double cone ferrule. Quick plug-in type: Φ4 nylon tube can be inserted.
6. Applicable to NLGI 000#, 00# grease.

Specification

Troubleshooting

Regular Inspection: Grease distributor wear, damage, and leakage should be checked, and all the connections must be tightened and aligned correctly.
Lubrication: The right type of grease applied to the distributor by the manufacturer’s instructions would lower friction and wear.
Cleaning: The grease distributor needs regular cleaning and its parts, as dirt, debris, or old grease might adversely affect the functioning of this part.
Replacement of Parts: Replace worn-out or damaged parts like seals or O-rings to avoid leakage and loss of efficiency.
Pressure Checks: Operating and reset pressures should be monitored for the specified range.

Manuals

Precise Lubrication Control: Distribution valves afford accuracy of discharge volume in a range of 0.03 mL to 0.5 mL for good lubrication.
Connection Methods: Distribution valves are offered with different connection methods: bushing, nut, one-touch connections, among others-that are easily adapted to the setup one is working on.
Durable Material: The valve bodies are of brass to make them strong and noncorrosive.
High Working Pressure: Distribution valves can bear working pressure from at least 1.2 MPa; thus, they are suitable for high-pressure applications.
Low Return Pressure: The return pressure is 0.5 MPa. This contributes toward the effectiveness of the system.
Compact Design: The dimensions are varied to fit various machinery and equipment.

Specification

Troubleshooting

Check for Blockages: Ensure that there are not any blockages within the metering valve or the piping. Clean any particles or buildup that is probably obstructing the glide.
Verify Connections: Make certain all connections are secure and there are not any leaks. Loose or faulty connections can affect the metering valve’s performance.
Inspect for Wear and Tear: Examine the metering valve for any symptoms of wear and tear, corrosion, or damage. Replace any tired components as needed.
Monitor Pressure Levels: Ensure that the running strain and return stress are within the particular variety. Incorrect strain tiers can cause troubles with lubrication.
Lubrication: Regularly lubricate the metering valve to make sure easy operation and prevent sticking.

Manuals

Combination: The distributor consists of a metering valve and a junction. You can select the appropriate output and assemble it into an MG2K distributor as needed.
Metering Valve: The MG2 valve meters grease correctly, maintaining a constant and economical feed.
Grease Nipples: MG2K is able to grease 1-12 plural points with one operation of a grease pump.
Material: The body is normally of brass to make it strong and resistant to corrosion.
Operating Pressure: Operating pressure range of 2.5 MPa with a reset pressure of 1.4 MPa.
Discharge Volume: Available in several discharge volumes, like 0.03, 0.05, 0.1, 0.2, 0.3, and 0.5 ml/cycle.

Specification

Installation

Preparation:
Gather tools and materials, including a valve, grease nipples, fittings, and the appropriate type of grease.
Positioning:
Point out where the metering valve is to be installed. It should be an easy-to-reach area for maintenance and operation purposes.
Fittings Connection:
Couple the fittings to the metering valve and the grease lines. Be sure all are properly fit together to avoid leakages.
System Testing:
Install the valve and nipples and then test the system by working the grease gun. Check the system for leaks or improper grease flow.
Final Adjustments:
Check that all components operate properly and that the lubrication system supplies grease as intended.

Manuals

1. Pressurized quantitative metering valve, a direct pressure action type.
The pressure oil delivered by the pump pushes the piston built into the metering valve to move, forcing the quantitative lubricant to be discharged.
When the pump stops working, the piston of the metering part is reset under the action of the spring force, that is, the quantitative lubricant is stored.
2. Accurate discharge, the metering part is discharged only once in one cycle, and the distance between each other in the system, whether it is far, near, high or low, horizontal or vertical installation, has no effect on the discharge.
3. Forced discharge, sensitive action. Two seals are used to prevent the discharged from flowing back.
4. MG2K metering valves can be selected based on the needs of each lubrication point, and can be used in combination with the MG2J junction, either in series or parallel.
5. Sleeve type: Φ4 nylon tube needs to be combined with PA4 compression bushing and PB4 sleeve. Quick plug-in type: Φ4 nylon tube can be inserted.
6. Applicable to NLGI 000#, 00#, 0#, 1# and 2# grease.

Specification

Application

MG2K is used in machine tool industries for the lubrication of CNC machine tools, lathe machines, milling, grinders, and more to ensure long life of efficiency at work.
Automated production line: MG2K in the automated production line to ensure the lubrication needs of continuous operation and improve production efficiency.
Engineering machinery: such as excavators, loaders and other heavy machinery equipment, reduce equipment wear and extend service life.
Textile machinery: the MG2K is used to lubricate textile equipment, allowing it to run without hindrances.

Manuals

High precision: JINPIN JSVB distributor controls highly precisely the amount of lubricant distributed, making sure each lubrication point is lubricated exactly correctly.
Reliability: The JSVB distributor is manufactured from high-quality material featuring high wear and corrosion resistance and therefore suitable for lots of harsh conditions.
Modular design: Easy installation and maintenance can be performed on the JSVB distributor, which can also be flexibly adjusted and expanded according to requirements.
Reliability: JSVB distributor keeps a good sealing to avoid lubricant leakage.

Specification

Application

CNC machinery and equipment: JSVB progressive distributors are used in the lubrication systems of various CNC machine tools to ensure the efficient operation of the equipment.
Automobile chassis: JSVB distributors are widely used in the chassis lubrication systems of buses and other vehicles.
Industrial equipment: JSVB distributors are suitable for the centralized lubrication systems of various industrial machinery and equipment to improve the service life and operating efficiency of the equipment.

Manuals

High precision: It can accurately distribute lubricant to each lubrication point by the JSV grease distributor for full lubrication of all parts of the equipment.
Modularity: According to needs, the JSV grease distributor can be combined modularly. Besides, it has strong flexibility and adaptability to various lubrication systems.
Strong durability: Made from quality material, the SV grease distributor has good resistance to wear and corrosion, thus suitable for whatever terrible environment it is.
High reliability: It has a precision design, stable operation, and can maintain a good state of work for a long time.

Specification

Application

Plastic machinery: Adaptation of JINPINLUB JSV metering blocks to injection moulding machines ensures mould and mechanical part lubrication.
Papermaking machinery: The adaptation of JSV metering blocks to lubrication in pulp and papermaking equipment can reduce failure accidents and maintenance costs.
Textile machinery: JSV metering blocks are suitable for lubrication in the textile equipment to ensure effective production and good quality of the products.
Printing and packaging machinery: JSV metering blocks are suitable for printing machines and packaging equipment for better improvements in production and qualities.

Manuals

Multi-outlet design: JSV progressive distributors are available in design up to 6 to 20 outlets to meet most lubrication requirements.
Advanced sequence distribution: JSV Grease Distributors dispense lubricant in sequence at each outlet, thereby easily monitoring the operation.
Flexibility adjustment: Metering valves of the JSV can be increased in dispensing volume by closing an outlet to direct lubricant to the next outlet.
Durability of materials: the valve distributors JSV are made of carbon steel and nickel-plated alloy with resistance to environmental aggression.

Specification

Application

Industrial machinery: JINPUNLUB JSV metering devices are widely applied to different kinds of industrial machinery and equipment, like machine tools, die-casting machines, injection molding machines, etc., so as to guarantee normal operation of the device and prolong the service life.
Engineering machinery: JSV metering devices Engineering machineries like excavator, loader, crane, etc can use progressive distributors to provide reliable lubrication and reduce the mechanical wear.

Manuals

Small size and compact structure: The design of JINPINLUB MUK distributor is very compact and suitable for installation in equipment with limited space. Its small size allows it to be easily integrated into various mechanical equipment.
Easy maintenance: The design of this oiler takes into account the maintenance needs of users. Its modular design allows each component to be replaced and repaired independently, reducing equipment downtime and improving production efficiency.
High oil output accuracy: The MUK single-line distributor can accurately control the output of lubricant to ensure that each lubrication point can obtain the right amount of lubrication. This not only improves the lubrication effect, but also reduces the waste of lubricant.

Specification

Application

MUK single-line grease distributors are widely adopted by the machine tool field in equipment such as CNC machine tools, machining centers, and grinders. It can provide good and effective lubrication, which greatly lengthens the service life of the equipment, reduces the rate of failure in the equipment, and enhances production efficiency. In order to ensure that it is operational at its best over a long period of time, the distributor should be well maintained on a regular basis. Users must inspect different parts of the oil injector from time to time to make sure that they are functioning effectively.

Manuals

Efficient lubrication: JINPINLUB MUK distributors can accurately distribute lubricants to various lubrication points to ensure the lubrication performance of mechanical equipment.
Multiple options: The metering valve, one of the components of MUK, has multiple discharge volumes to choose from, such as 0.05, 0.1, 0.2, 0.3, 0.5mL/cycle.
Quick-insert fittings: In addition to the most commonly used sleeve-type outlet connection fittings, there are also quick-insert connectors available, which are faster and more convenient to install.
High cost-effectiveness: It can be used in combination with a lubrication pump with pressure relief or a manual lubrication pump, which is more economical.

Specification

Application

MUK distributor can form a single-line pressure relief lubrication system with a volumetric grease lubrication pump, whether it is an electric grease lubrication pump, a pneumatic grease lubrication pump or a manual grease lubrication pump.
MUK grease distributor is mainly suitable for CNC machinery, machining centers, production lines, textiles, chemicals, forging, punching and other mechanical industries to ensure the lubrication performance of various mechanical products.

Manuals