Grease lubricator – JINPINLUB https://www.jinpinlub.com Lubrication system solution provider Wed, 11 Dec 2024 10:11:05 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.jinpinlub.com/wp-content/uploads/2024/08/JINPINLUB-100x100.png Grease lubricator – JINPINLUB https://www.jinpinlub.com 32 32 J100-3D Single-Line Lubrication Pump With Pressure Relief https://www.jinpinlub.com/product/j100-3d-single-line-lubrication-pump-with-pressure-relief/ Wed, 11 Dec 2024 09:28:20 +0000 https://www.jinpinlub.com/?post_type=product&p=3977 Features

– The J100 lubrication pump is driven by a motor to drive the piston pump to move back and forth to deliver grease to the pump outlet, and then to the lubrication point through the pressurized distributor. When the preset pressure is reached, the motor stops working, and the pressure relief valve starts working accordingly, releasing the pressure in the system, and a cycle is completed.
– The lubrication pump can be controlled by an external control system, which mainly sets the lubrication frequency, connection time and interval time.
– The system pressure can be monitored by a pressure switch, which is usually installed in the oil pipe of the last distributor. When the pressure switch sends a signal to the control unit, the signal stops the pump.
– The maximum pressure of the J100 lubrication pump is 8MPa, the minimum lubrication interval is 5 minutes, and the main line length is 15 meters. It is suitable for small and medium-sized equipment with up to 100 lubrication points for indoor use.

Specification

Model J100-3D
Lubrication time PLC or external controller
Interval time PLC or external controller
Operating temperature 0℃~ +50°C (Low temperature conditions require antifreeze grease)
Number of outlets 1 or 2
Reservoir capacity 0.3L, 0.5L, 0.7L, 1.5L
Refilling Filling port/removable/cartridge
Lubricant NLGI 000#~2#
Pressure relief valve Optional
Discharge 15 mL/min
Max. operating pressure 8.0 MPa
Connection thread Outlet Φ6
Operating voltage 24VDC
Certification CE
Low level switch N.C. contact

Mounting

– Fix the lubrication pump on a vertical and flat surface that can fully bear the weight of the pump.
– Install and fix the lubrication pump with 6 M8 bolts through the φ9 holes.
– It is recommended to apply anti-vibration glue when the lubrication pump is subject to vibration.
– Install the lubrication pump in a location that is isolated from water, oil, chips and dust.
– The vibration of the installation location needs to be 9G (88m/s2) or less.
– On the electrical connection of the lubrication pump unit, make sure to take appropriate measures to prevent interference between signals due to inductance, capacitance or electromagnetic coupling. Although the cables are placed separately, use anti-interference cables in places where electrical interference fields can distort signal transmission.

Manuals

View Datasheet - J100 Grease Pump
]]> J100-3D 300mL Detachable Reservoir Electric Lubrication Pump https://www.jinpinlub.com/product/j100-3d-300ml-detachable-reservoir-electric-lubrication-pump/ Wed, 11 Dec 2024 08:39:53 +0000 https://www.jinpinlub.com/?post_type=product&p=3972 Features

– Stable operation: It can operate reliably in single-line lubrication systems with up to 20 lubrication points and a main line length of nearly 15 meters.
– Integrated pressure relief function: The optional integrated pressure relief valve meets the requirements of single-line lubrication system pumps and can be used stably in single-line automatic lubrication systems.
– Flexible number of outlets: There are designs with 1 or 2 oil outlets, which can be selected according to actual needs.
– Easy installation: The air vent screw is easy to reach, which enables simple installation and operation startup.
– Liquid level monitoring: It provides filling level monitoring with early warning function, which can monitor the liquid level of the oil tank or grease cartridge.
– Multiple capacities: There are three reservoir versions, fixed reservoir version, removable reservoir version and replaceable cartridge version, and each version has different capacities.
– Compact structure: The overall size is relatively small, does not take up too much space, can adapt to a more compact installation environment, and is convenient for use in various small machines or equipment.

Specification

Model J100-3D
Lubrication time PLC or external controller
Interval time PLC or external controller
Operating temperature 0℃~ +50°C (Low temperature conditions require antifreeze grease)
Number of outlets 1 or 2
Reservoir capacity 0.3L, 0.5L, 0.7L, 1.5L
Refilling Filling port/removable/cartridge
Lubricant NLGI 000#~2#
Pressure relief valve Optional
Discharge 15 mL/min
Max. operating pressure 8.0 MPa
Connection thread Outlet Φ6
Operating voltage 24VDC
Certification CE
Low level switch N.C. contact

Pipeline

In terms of pipe materials and specifications, it is necessary to select suitable oil-resistant and corrosion-resistant pipes according to the characteristics of the lubricant, system pressure and environment.
Pipe cleaning is very important. Before installation, it is necessary to thoroughly remove impurities with compressed air blowing and chemical cleaning to prevent foreign matter from entering the lubricating pump to damage parts and disturb operation, and ensure that the lubricant flows smoothly and purely.
When connecting, the seals should be selected well, and the nuts and bolts should be tightened according to the specified torque to ensure good and firm sealing, and check for leaks regularly.
In terms of layout, reduce the number of pipes, avoid sharp bends and twists, ensure smooth flow of lubricants, properly support and fix, and prevent vibration displacement.
Finally, exhaust after installation. Set an exhaust valve at a high point, slowly open and exhaust the air, and wait for the lubricant to flow out without bubbles to prevent uneven lubrication and pump idling.

Manuals

View Datasheet - J100 Grease Pump
]]>