Grease metering device – JINPINLUB

MG2K-8 PDI Metering Injector For Single Line Grease System

JINPINLUB — Thu, 28 Nov 2024 16:49:30 +0000

Feature

Combination: The distributor consists of a metering valve and a junction. You can select the appropriate output and assemble it into an MG2K distributor as needed.
Metering Valve: The MG2 valve meters grease correctly, maintaining a constant and economical feed.
Grease Nipples: MG2K is able to grease 1-12 plural points with one operation of a grease pump.
Material: The body is normally of brass to make it strong and resistant to corrosion.
Operating Pressure: Operating pressure range of 2.5 MPa with a reset pressure of 1.4 MPa.
Discharge Volume: Available in several discharge volumes, like 0.03, 0.05, 0.1, 0.2, 0.3, and 0.5 ml/cycle.

Specification

Function principle	Pressure relief metering valve
Numbers of Outlets	1~12
Metering quantity	0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant	NLGI 000#, 00#, 0#, 1# and 2#
Operating temperature	-20 to +80 °C
Operating pressure	≥2.5MPa
Material	Aluminum+Copper
Connection outlet	Inlet M10x1/Rc1/8, Outlet Φ4(M8x1)
Outlet fittings	Sleeve type, Quick type
Mounting position	Any

Installation

Preparation:
Gather tools and materials, including a valve, grease nipples, fittings, and the appropriate type of grease.
Positioning:
Point out where the metering valve is to be installed. It should be an easy-to-reach area for maintenance and operation purposes.
Fittings Connection:
Couple the fittings to the metering valve and the grease lines. Be sure all are properly fit together to avoid leakages.
System Testing:
Install the valve and nipples and then test the system by working the grease gun. Check the system for leaks or improper grease flow.
Final Adjustments:
Check that all components operate properly and that the lubrication system supplies grease as intended.

Manuals

View Datasheet - MG2K Distributor

MG2K Grease System Pressure Relief Quantitative Distributor

JINPINLUB — Thu, 28 Nov 2024 13:44:02 +0000

Feature

1. Pressurized quantitative metering valve, a direct pressure action type.
The pressure oil delivered by the pump pushes the piston built into the metering valve to move, forcing the quantitative lubricant to be discharged.
When the pump stops working, the piston of the metering part is reset under the action of the spring force, that is, the quantitative lubricant is stored.
2. Accurate discharge, the metering part is discharged only once in one cycle, and the distance between each other in the system, whether it is far, near, high or low, horizontal or vertical installation, has no effect on the discharge.
3. Forced discharge, sensitive action. Two seals are used to prevent the discharged from flowing back.
4. MG2K metering valves can be selected based on the needs of each lubrication point, and can be used in combination with the MG2J junction, either in series or parallel.
5. Sleeve type: Φ4 nylon tube needs to be combined with PA4 compression bushing and PB4 sleeve. Quick plug-in type: Φ4 nylon tube can be inserted.
6. Applicable to NLGI 000#, 00#, 0#, 1# and 2# grease.

Specification

Function principle	Pressure relief metering valve
Numbers of Outlets	1~12
Metering quantity	0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant	NLGI 000#, 00#, 0#, 1# and 2#
Operating temperature	-20 to +80 °C
Operating pressure	≥2.5MPa
Material	Aluminum+Copper
Connection outlet	Inlet M10x1/Rc1/8, Outlet Φ4(M8x1)
Outlet fittings	Sleeve type, Quick type
Mounting position	Any

Application

MG2K is used in machine tool industries for the lubrication of CNC machine tools, lathe machines, milling, grinders, and more to ensure long life of efficiency at work.
Automated production line: MG2K in the automated production line to ensure the lubrication needs of continuous operation and improve production efficiency.
Engineering machinery: such as excavators, loaders and other heavy machinery equipment, reduce equipment wear and extend service life.
Textile machinery: the MG2K is used to lubricate textile equipment, allowing it to run without hindrances.

Manuals

View Datasheet - MG2K Distributor

JSV Metering Block For Grease Centralized Lubrication System

JINPINLUB — Wed, 28 Aug 2024 20:29:17 +0000

Features

Precise lubrication: every lubrication point of JSV metering device may get accurate lubricant output to guarantee the best operation of the equipment.
Energy-efficient and effective: the JSV metering device has a compact design for ease of installation, and it is integrated with a check valve to reduce lubricant waste, hence improving energy efficiency.
Multi-point monitoring: the JSV metering device is fitted with an indication rod and proximity switch at the outlet for real-time monitoring of lubrication status.
Strong durability: the JSV metering device is of superior quality in materials, and withstood high operating pressure, meeting the requirements of many kinds of bad working condition.

Specification

Function principle	Metering devices
Numbers of Outlets	6-20
Metering quantity	0.2mL/cycle
Lubricant	Grease up to NLGI 2, oil 32-220cSt@40℃
Operating temperature	–20 to +80 °C
Operating pressure	Max. 300 bar
Material	Black galvanized
Connection inlet	Φ6/Φ8 (M10x1)
Connection outlet	Φ6/Φ8 (M10x1)
Mounting position	Any

Application

Automobile manufacturing: on various links of automobile production lines, the progressive distributor was adopted to lubricate various transmission parts so as to promote the production efficiency and product quality.
Metallurgic equipment: JSV metering devices can effectively avoid equipment failure during operation and ensure continuity of production in the continuous casting machines, rolling mills, and other metallurgic equipment.
Food processing: In the food-processing equipment, progressive distributors provide the appropriate lubrication to keep the equipment clean and safe.

Manuals

View Datasheet - JSV Distributor

MUK Precise Multi-Outlet Volumetric Grease Metering Device

JINPINLUB — Mon, 26 Aug 2024 20:05:54 +0000

Feature

Multi-outlet distribution: JINPINLUB MUK grease pressure relief distributors can be configured with 2 to 12 digits to meet the needs of different lubrication systems.
Umbrella valve design: The umbrella valve inside the distributor controls the flow of lubricant under the pressure of the lubrication system, making it very precise and distributed to various lubrication points.
Multiple outputs: The metering valve, one of the components of MUK, has multiple discharge volumes to choose from, such as 0.05, 0.1, 0.2, 0.3, 0.5mL/cycle.
Corrosion-resistant materials: MUK grease distributors are usually made of corrosion-resistant materials to adapt to different working environments.

Specification

Function principle	Pressure relief metering valve
Numbers of Outlets	1, 2, 3, 4, 5
Metering quantity	0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant	NLGI 000#, 00# grease.
Operating temperature	0 to +80 °C
Operating pressure	0.5~1.5MPa
Material	Brass, aluminum
Connection outlet	Inlet Rc1/8, Outlet Φ4(Rc1/8)
Outlet fittings	Sleeve type, Quick type
Mounting position	Any

Principle

The lubricant flows out of the lubrication pump, and the system pressure pushes the piston in the MUK distributor upward. The lubricant stored in the oil chamber is discharged. When the piston moves to the top of the oil chamber, the oil discharge is completed.
When the lubrication pump stops supplying oil, the pressure relief valve will automatically release, allowing the lubricant in the main oil pipe to return through the pressure reducing valve. At this time, the system pressure is reduced, and the lubricant is stored inside the distributor, ready for the next cycle.

Manuals

View Datasheet - MUK Distributor

JL-1 High Pressure Metering Device For Single Line Lube System

JINPINLUB — Wed, 17 Jul 2024 13:08:15 +0000

Features

1. High-pressure operation: The JL-1 metering device is suitable for high-pressure environments; its working pressure range is 127-240 bar while the release pressure is rated at 41 bar.
2. Externally adjustable output: The output from the device is externally adjustable in the range of 0.016-1.31 cm³ to be used in various lubrication needs .
3. Indicator needle design: Every metering device is equipped with an indicator needle that permits visual inspection of its operating condition and therefore guarantees lubrication reliability.
4. Material selection: The JL-1 metering device has two material options: carbon steel and stainless steel for use in different environments. The stainless steel version is applicable for working environments that are hostile to carbon steel.
5. Multi-port design: The device can carry 1 through 6 lubrication points; thus, it is flexible in its ability to adapt to various lubrication system requirements.
6. Easy maintenance: Individual metering equipment is easy to dismantle for inspection purposes or replacement of worn-out parts, thus saving time for maintenance and reducing the overall maintenance costs.

Specification

Function principle	Pressure relief metering valve
Numbers of Outlets	1, 2, 3, 4, 5, 6
Metering quantity	0.016-1.31mL/cycle
Lubricant	Grease NLGI 0, 1, 2
Operating temperature	(-10 to +80 °C)
Operating pressure	127-240 bar
Material	Carbon steel, stainless steel
Connection main line	Rc3/8
Connection outlet	M22*1.5
Mounting position	Any

Application

1. Mining and mineral processing: Metering devices JL-1 are widely applied in mining and mineral processing industries, providing systems with reliable lubrication during very hard work.
2. Construction machinery: In the field of construction equipment, JL-1 metering device guarantees that each equipment lubrication point is well lubricated to extend equipment life.
3. Iron and steel industry and heavy industry: This equipment is also applied in a wide scope in the steels and heavy industries, stably working under high pressure and high temperature environments.

Manuals

View Datasheet - JL-1 Grease Injector