Lubricator with Controller – JINPINLUB https://www.jinpinlub.com Lubrication system solution provider Thu, 22 Aug 2024 03:30:29 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.jinpinlub.com/wp-content/uploads/2024/08/JINPINLUB-100x100.png Lubricator with Controller – JINPINLUB https://www.jinpinlub.com 32 32 J203 Auto Lubricator With Controller For Multi Line Greasing https://www.jinpinlub.com/product/j203-auto-lubricator-with-controller-for-multi-line-greasing/ Thu, 22 Aug 2024 03:28:29 +0000 https://www.jinpinlub.com/?post_type=product&p=3339 Refilling

1. Filling via reservoir cover
Unscrew the lubrication pump container cap from the reservoir in a counterclockwise direction. Place the reservoir cover in a clean place, which must not be dirty.
Fill the lubricant reservoir from the top to the MAX mark of the lubrication pump and add lubricant as far as possible without bubbles.
Reinstall the lubrication pump reservoir cover in a clockwise direction.
2. Filling via the filling nipple
Connect the lubrication pump filling nipple to the filling pump.
Turn on the filling pump and fill with lubricant up to the MAX mark.
Turn off the filling pump and remove the filling nipple of the lubrication pump.

Specification

Operating temperature (-40°C to +70°C)
Number of outlets 1, 2 or 3
Reservoir capacity 2L, 4L, 8L
Refilling Hydraulic lubrication fitting or from top
Lubricant Greases of at least NLGI grade 2, Oils up to 40mm²/s (cSt) at 40° C
Class of protection IP6K 9K
Piston diameter, K5 5 mm, approx. 2 cm³/min
Piston diameter, (standard) K6 6 mm, approx. 2.8cm³/min
Piston diameter, K7 7 mm, approx. 4 cm³/min
Max. operating pressure 350 bar
Connection thread G 1/4
Operating voltage 12VDC, 24VDC, 110-240 VAC

Application

Use clean components and grease-filled lubrication lines for the lubrication system.
In principle, the lubrication line system should be laid in such a way that no bubbles are formed.
When installing a distributor at the end of the lubrication main line, make sure that the outlet of the lubricant distributor faces upwards.
Pipeline bends, elbows, seals protruding inwards and unavoidable transitions in cross-section should be as gentle as possible to ensure unimpeded lubricant flow.

Manuals

View Datasheet - J203 Grease Pump
]]>