Metering valves – JINPINLUB https://www.jinpinlub.com Lubrication system solution provider Sat, 30 Nov 2024 19:26:54 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.jinpinlub.com/wp-content/uploads/2024/08/JINPINLUB-100x100.png Metering valves – JINPINLUB https://www.jinpinlub.com 32 32 MGK-10 Quick Connector Volumetric Grease Distributor Device https://www.jinpinlub.com/product/mgk-10-quick-connector-volumetric-grease-distributor-device/ Fri, 29 Nov 2024 09:59:40 +0000 https://www.jinpinlub.com/?post_type=product&p=3911 Feature

1. Pressurized quantitative metering valve, a direct pressure action type.
The pressure oil delivered by the pump pushes the piston built into the metering valve to move, forcing the quantitative lubricant to be discharged.
When the pump stops working, the piston of the metering part is reset under the action of the spring force, that is, the quantitative lubricant is stored.
2. Accurate discharge, the metering part is discharged only once in one cycle, and the distance between each other in the system, whether it is far, near, high or low, horizontal or vertical installation, has no effect on the discharge.
3. Forced discharge, sensitive action. Two seals are used to prevent the discharged from flowing back.
4. Metering valves can be selected based on the needs of each lubrication point, and can be used in combination with the MGJ junction, either in series or parallel.
5. Sleeve type: Φ4 nylon tube needs to be combined with PA-4 joint and PB-4 double cone ferrule. Quick plug-in type: Φ4 nylon tube can be inserted.
6. Applicable to NLGI 000#, 00# grease.

Specification

Function principle Pressure relief metering valve
Numbers of Outlets 1~12
Metering quantity 0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant NLGI 000#, 00# grease.
Operating temperature -20 to +80 °C
Operating pressure 0.5~1.5MPa
Material Copper, aluminum
Connection outlet Inlet Rc1/8, Outlet Φ4(Rc1/8)
Outlet fittings Sleeve type, Quick type
Mounting position Any

Troubleshooting

Regular Inspection: Grease distributor wear, damage, and leakage should be checked, and all the connections must be tightened and aligned correctly.
Lubrication: The right type of grease applied to the distributor by the manufacturer’s instructions would lower friction and wear.
Cleaning: The grease distributor needs regular cleaning and its parts, as dirt, debris, or old grease might adversely affect the functioning of this part.
Replacement of Parts: Replace worn-out or damaged parts like seals or O-rings to avoid leakage and loss of efficiency.
Pressure Checks: Operating and reset pressures should be monitored for the specified range.

Manuals

View Datasheet - MGK Metering Valve
]]> MGK Pressurized Grease Injector Metering Valves Series MG https://www.jinpinlub.com/product/mgk-pressurized-grease-injector-metering-valves-series-mg/ Fri, 29 Nov 2024 07:26:22 +0000 https://www.jinpinlub.com/?post_type=product&p=3906 Feature

Precise Lubrication Control: Distribution valves afford accuracy of discharge volume in a range of 0.03 mL to 0.5 mL for good lubrication.
Connection Methods: Distribution valves are offered with different connection methods: bushing, nut, one-touch connections, among others-that are easily adapted to the setup one is working on.
Durable Material: The valve bodies are of brass to make them strong and noncorrosive.
High Working Pressure: Distribution valves can bear working pressure from at least 1.2 MPa; thus, they are suitable for high-pressure applications.
Low Return Pressure: The return pressure is 0.5 MPa. This contributes toward the effectiveness of the system.
Compact Design: The dimensions are varied to fit various machinery and equipment.

Specification

Function principle Pressure relief metering valve
Numbers of Outlets 1~12
Metering quantity 0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant NLGI 000#, 00# grease.
Operating temperature -20 to +80 °C
Operating pressure 0.5~1.5MPa
Material Copper, aluminum
Connection outlet Inlet Rc1/8, Outlet Φ4(Rc1/8)
Outlet fittings Sleeve type, Quick type
Mounting position Any

Troubleshooting

Check for Blockages: Ensure that there are not any blockages within the metering valve or the piping. Clean any particles or buildup that is probably obstructing the glide.
Verify Connections: Make certain all connections are secure and there are not any leaks. Loose or faulty connections can affect the metering valve’s performance.
Inspect for Wear and Tear: Examine the metering valve for any symptoms of wear and tear, corrosion, or damage. Replace any tired components as needed.
Monitor Pressure Levels: Ensure that the running strain and return stress are within the particular variety. Incorrect strain tiers can cause troubles with lubrication.
Lubrication: Regularly lubricate the metering valve to make sure easy operation and prevent sticking.

Manuals

View Datasheet - MGK Metering Valve
]]>