Minimum quantity lubrication – JINPINLUB https://www.jinpinlub.com Lubrication system solution provider Wed, 01 Jan 2025 16:29:16 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.jinpinlub.com/wp-content/uploads/2024/08/JINPINLUB-100x100.png Minimum quantity lubrication – JINPINLUB https://www.jinpinlub.com 32 32 MLS 4L Minimal Lubrication Control Unit For Sawing Machine https://www.jinpinlub.com/product/mls-0-5l-minimal-lubrication-control-unit-for-sawing-machine/ Wed, 01 Jan 2025 13:06:51 +0000 https://www.jinpinlub.com/?post_type=product&p=4052 Feature

1. Precision lubrication: micro-lubrication pump has good adjustability, air metering screw, and pump stroke adjustment knob that accurately control the spray volume of the atomizing pump; pulse generator controlling the pump cycle rate can be conducted in several kinds of precise adjustment ways.
2. Flexibility in configuration: It is a modular design that customers can configure themselves according to their needs. The system consists of all kinds of pumps, regulating valves, liquid storage tanks, and so on. Different application scenes are adopted with different system structures and component collocations.
3. The parameters are determined: air supply pressure, micro-lubrication pump parameter, air flow, pulse generator frequency, working and storage temperature range, etc.

Specification

Supply air pressure Clean, dry compressed air, 4~7 bar, 708 LPM minimum
Pump viscosity 50~1000 SUS
Pump output at full stroke 0.033mL (1-drop standard), 0.100mL (3-drop standard)
Pump output rate 0~396mL/hr (1-drop standard), 0~1200mL/hr (3-drop standard)
Air flow rate 0~4 SCFM for each air and oil output, 1~2 SCFM typical
Pulse generator 5~50 pulses/min, Max 200pulses/min(not recommended)
Operating temperature 0℃ ~ +50˚C
Storage temperature (-16℃ ~ +70˚C)
Fluid reservoir Customizable, standard 0.5L, 1.0L, 2L, 4L

Mounting

Installation location
The micro lubrication system is installed near the machine and ensures that there are no obstacles that may compress or twist the output or gas supply pipelines. Meanwhile, the device must be installed with the storage tank facing upwards and in a horizontal position.
Installation method
Direct installation: Directly mount the micro lubrication system onto the machine, observing the installation for personal safety. Use appropriate screws at each of the installation positions with their corresponding screws for correct installation.
Magnet installation: Installation with magnets may also be optionally used depending on where installation requirements need. Observing safety in the installation will also ensure the stability of the micro lubrication system being installed.

Manuals

View Datasheet - Minimal Quantity Lubrication
]]>