Oil distributor – JINPINLUB

MSK-9 Positive Displacement Injection Thin Oil Distributor

JINPINLUB — Sat, 30 Nov 2024 02:05:10 +0000

Feature

Volume of Various Discharges: Can be availed with a difference in models, the stroke volume ranges from 0.03 to 0.5 ml.
Operate under High Pressures: Operating pressure could be as high as 1.0 MPa.
Quick Reset: Reset pressure is 0.3 MPa, enabling quicker recovery between cycles.
Construction: Distributor made of brass, hence robust and resistant to wear.
Maintenance-Friendly: Easy assembly and disassembly are designed to make maintenance as straightforward as possible, with minimum loss of production.
Corrosion Resistance: Construction materials ensure resistance to corrosion, enabling the valve to last long in adverse environments.
Customizable: The distributor is also available in various sizes and specifications that meet the different needs and requirements of any application.

Specification

Function principle	Positive displacement injector
Numbers of Outlets	1~12
Metering quantity	0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant	15-90 CSt@40℃
Operating temperature	-20 to +80 °C
Operating pressure	Minimum 1.0 MPa
Material	Copper, aluminum
Connection outlet	Inlet Rc1/8, Outlet Φ4(Rc1/8)
Outlet fittings	Sleeve type, Quick type
Mounting position	Any

Testing

Visual Inspection: Inspect the injector and all of its connections for any signs of damage or leakage.
Pressure Test: Connect the injector to a pressure source and increase the pressure gradually to the operating level of 1.0 MPa. Look for leaks or other abnormalities.
Flow Test: Measure the volume discharged to verify that it falls within the range of 0.03 to 0.5 ml per stroke. This can be accomplished by utilizing a calibrated measuring device.
Reset Test: Check that the injector resets correctly at the set reset pressure of 0.3 MPa.
Operational Test: Run the injector through several cycles to ensure consistency in performance and check for any irregularities in operation.

Manuals

View Datasheet - MSK Metering Valve

MOK-6 Positive Displacement Injection Oil Metering Valves

JINPINLUB — Fri, 29 Nov 2024 19:21:08 +0000

Feature

1. The pressurized (volumetric) metering valve is a direct pressure action type.
The pressure oil delivered by the lubrication pump pushes the piston built into the metering valve to move and force the quantitative oil to be discharged. When the lubrication pump stops working, the piston of the metering part is reset under the action of the spring force, that is, the metering and storage of quantitative oil is carried out.
2. The metering valve has accurate oil discharge, and the metering part only discharges oil once in one oil supply cycle. The distance between the metering valves in the lubrication system is far, near, high, low, and horizontal or vertical installation. It has no effect on its displacement.
3. The metering valve is sensitive and uses two seals to prevent the discharged oil from flowing back.
4. The metering valve and the junction are split structures. According to the oil required by each lubrication point, the corresponding metering valve can be selected at will and combined with the MOJ junction (both series and parallel combinations are available).
5. Outlet diameter of the metering valve is Φ4, and there are two ways to connect it.
Card sleeve type: tube needs to be used in combination with PA4 compression bushing and PB4 sleeve.
Quick-insert type: directly insert the Φ4 tube.

Specification

Function principle	Pressure relief metering valve
Numbers of Outlets	1~12
Metering quantity	0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant	15-90 CSt@40℃
Operating temperature	-20 to +80 °C
Operating pressure	Minimum 1.0 MPa
Material	Copper, aluminum
Connection outlet	Inlet Rc1/8, Outlet Φ4(Rc1/8)
Outlet fittings	Sleeve type, Quick type
Mounting position	Any

Application

Industrial Machinery
CNC Machines: Lubricates critical moving parts to ensure smooth operation.
Conveyors: Lubricates bearings and rollers to reduce friction and wear.
Textile Machines: Keeps components, such as spindles and gears, running smoothly.
Automotive
Engines: Supplies the exact amount of oil to different parts of the engine, improving performance and durability.
Chassis Lubrication: Allows for smooth movement of suspension and steering.
Manufacturing
Robotic Arms: Lubrication is provided to joints and moving parts for smooth and precise movement.
Packaging Equipment: Provides lubrication to gears and other mechanical elements to maintain efficiency.
Heavy Equipment
Construction Machinery: Hydraulic systems and other vital components in construction machinery are kept well-lubricated.
Agricultural Equipment: Gears, chains, and other moving parts are lubricated to reduce wear and tear.

Manuals

View Datasheet - MOK Metering Valve

MOK-5 Metering Valve For Positive Displacement Lube System

JINPINLUB — Fri, 29 Nov 2024 18:48:33 +0000

Feature

Precise Control: The movement of the distributor plunger ensures the exact volume of oil injected every cycle.
Consistency: The distributor is designed to guarantee consistent lubrication, which is important for machinery to work reliably.
Reliability: By positive displacement, even with variation in pressures, the volume of oil delivered remains constant.
Versatility: Ensures critical components of Industrial Machinery are always well lubricated to avoid wear and tear. Used in lubrication systems to keep the automotive engine and other moving parts serviced. Keeps manufacturing equipment running by precisely metering lubricant.

Specification

Function principle	Pressure relief metering valve
Numbers of Outlets	1~12
Metering quantity	0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant	15-90 CSt@40℃
Operating temperature	-20 to +80 °C
Operating pressure	Minimum 1.0 MPa
Material	Copper, aluminum
Connection outlet	Inlet Rc1/8, Outlet Φ4(Rc1/8)
Outlet fittings	Sleeve type, Quick type
Mounting position	Any

Principle

Oil Reservoir and Suction: The plunger in the metering valve moves when the system is turned on, and it creates a vacuum that sucks the oil from the reservoir into the chamber.
Filling of the Chamber: As the metering valve plunger retracts, it opens an inlet port through which oil flows into the chamber. The amount of oil entering the chamber is precisely controlled to ensure accurate dosing.
Compression and Injection: Once the chamber is filled with the required amount of oil, the plunger moves forward. This forward motion closes the inlet port and compresses the oil within the chamber.
Discharge: The compressed oil is discharged through the outlet port. This outlet port leads to the lubrication point, where the oil is required.
Reset Mechanism: After the oil is discharged, the plunger resets to its original position. This resetting allows the chamber to refill with oil for the next cycle.

Manuals

View Datasheet - MOK Metering Valve

DPB Pressurized Lubrication System Metering Device Injector

JINPINLUB — Mon, 26 Aug 2024 19:36:41 +0000

Feature

Fixed output volume: JINPINLUB DPB distributors provide precise amount of lubricant per discharge, ensuring consistent lubrication effect, and can be equipped with detectors.
Multiple flow rates: 0.03, 0.06, 0.10 and 0.16 cc/cycle can be selected to meet different needs.
Wide range of working pressures: The minimum working pressure is 8bar and the maximum can reach 50bar, which is suitable for a variety of industrial environments.
Applicable oil viscosity: The oil injector is suitable for oils with a viscosity range of 32-90 cSt @ 40℃, ensuring smooth operation of the equipment.
Use with: The volumetric distributor needs to be used with a pressure release oil lubricator to ensure oil supply when the lubricator is running.

Specification

Function principle	Pressurized Distributor
Outlets	2, 3, 4, 5, 6, 8 ,10
Metering quantityoil	0.03, 0.06, 0.10, 0.16mL/cycle
Lubricant	32~90 cSt@40°C (Oil), ≤NLGI 0 (Grease)
Operating temperature	0 to +80 °C
Operating pressure	8~30bar(Oil), 20~50bar(Grease)
Material	Zinc die-cast, brass
Connection outlet	Inlet Φ6(M10x1), Outlet Φ4(M8x1)
Outlet fittings	Sleeve type, Quick type
Mounting position	Any

Application

Pressure relief: This type of distributor is used in conjunction with a pressure relief-type oil lubricator. During operation of the lubricator, the pressure in the system rises.
Oil discharge: With the rise in pressure, the displaced piston in the distributor discharges a metered amount of lubricant to each of the lubrication points.
Fixed flow: The amount of lubricant discharged each time is fixed, ensuring that each lubrication point receives consistent lubrication.
Cycling process: When the lubricator stops running, the system pressure is released and the piston returns to the initial position, ready for the next lubrication cycle.

Manuals

View Datasheet - DPB Distributor

Zinc Alloy Resistance A-Type Oil Distributor For Lubrication

JINPINLUB — Sat, 10 Aug 2024 03:16:23 +0000

Features

1. Excellent material: Made of high-quality zinc alloy material, it has good mechanical strength and wear resistance.
2. Strong corrosion resistance: Zinc alloy itself has good corrosion resistance and can work stably for a long time in harsh environments.
3. Compact structure: The A-type distributor has a compact design, occupies a small space, and is easy to install and maintain.
4. High precision: The various components of the distributor are precision-processed to ensure the accuracy and stability of fluid distribution.

Specification

Function principle	Zinc alloy junction
Numbers of Outlets	2, 3, 4, 5, 6,7, 8, 10
Lubricant	Grease or Oil
Operating temperature	(-20℃ to +60 °C)
Operating pressure	Max 420 bar
Material	Zinc alloy material
Connection main line	Φ4(M8x1), Φ6(M10x1)
Connection outlet	Φ4(M8x1), Φ6(M10x1)
Mounting position	Any

Application

Installation: According to the specific requirements of the equipment and the size of the dispenser, select the appropriate installation location and method to ensure that the dispenser is installed firmly and stably.
Maintenance: Regularly check whether the components of the A-type dispenser are intact and whether there is any wear or damage. If there is any problem, replace or repair it in time. Keep the surface of the dispenser clean to avoid the adhesion of dust and impurities.

Manuals

View Datasheet - Type-A Distributor