Pneumatic oil mist pump – JINPINLUB

Customized MQL Minimal Quantity Lubrication Cooling System

JINPINLUB — Wed, 01 Jan 2025 20:38:57 +0000

Feature

– Air filter: Standard configuration of MQL lubrication system with steel housing, used to filter impurities in the air.
– Control valve: MQL lubrication system includes solenoid valve, air pilot valve, manual valve or foot valve, and the appropriate control method can be selected according to specific needs.
– Positive displacement pump: Accurate and reliable, with full stroke output of 0.033 mL, 0.100 mL or 0.045 mL.
– Pneumatic pulse generator: Controls the cycle speed of the atomizing pump, and its frequency is affected by air pressure changes and mechanical changes and can be adjusted.
– Air metering screw: Used to control the nozzle air flow of the atomizing pump, and adjust the spray effect together with the pump stroke adjustment knob.
– Pump stroke adjustment knob: Controls the amount of liquid delivered per stroke to achieve precise adjustment of the oil output.
– Reservoir: MQL lubrication system has a variety of capacities to choose from, such as 0.5L, 1.0L, 2.0L, 4.0L, and can also be customized according to needs.

Specification

Supply air pressure	Clean, dry compressed air, 4~7 bar, 708 LPM minimum
Pump viscosity	50~1000 SUS
Pump output at full stroke	0.033mL (1-drop standard), 0.100mL (3-drop standard)
Pump output rate	0~396mL/hr (1-drop standard), 0~1200mL/hr (3-drop standard)
Air flow rate	0~4 SCFM for each air and oil output, 1~2 SCFM typical
Pulse generator	5~50 pulses/min, Max 200pulses/min(not recommended)
Operating temperature	0℃ ~ +50˚C
Storage temperature	(-16℃ ~ +70˚C)
Fluid reservoir	Customizable, standard 0.5L, 1.0L, 2L, 4L

Principle

Pump working principle
The power source of the MQL system: It uses a pneumatic positive displacement pump to achieve oil delivery and metering.
Metering method: The atomizing pump controls the air flow through the air metering screw, and works together with the stroke adjustment knob to achieve accurate proportioning and output of the oil and air mixture.
Atomization principle
In the atomizing pump of the MQL system, the oil and air are kept separate in the pump until they reach the application point. Through the coaxial output method, the fluid and air are combined at the tip of the nozzle, and the “air jacket” around the fluid outlet uniformly atomizes the fluid
Pulse generator principle
The pulse generator of the MQL system controls the cycle rate of the pump by controlling the on-off rhythm of the compressed air. If precise control is required, use the adjustable air switch and adjust the knob to set the frequency.

Manuals

View Datasheet - Minimal Quantity Lubrication

Custom Minimal Quantity Lubrication Pump For Hole Drilling

JINPINLUB — Wed, 01 Jan 2025 19:59:02 +0000

Feature

1. Reservoir capacity: MLS minimal quantity lubrication system provides storage tanks of different capacities, with a standard capacity of 05L, 1L, 2L, 4L, users can choose the appropriate storage tank based on actual usage.
2. Air flow control: The air flow of the atomizing pump is controlled by the air metering screw, and the density and distance of spray are determined by the air metering screw and the pump stroke adjustment knob.
3. Pulse generator frequency adjustment: The pulse generator of the MLS minimal quantity lubrication is a specially designed and manufactured variable pneumatic timer used to control the circulation speed of the pump, with a recommended frequency of 5-50 pulses per minute.
4. Electromagnetic valve control output: The pneumatic circuit of the MLS minimal quantity lubrication can also be controlled by an electromagnetic valve, and the air input frequency can be set to achieve precise control of the output frequency of the atomization pump through the electromagnetic valve.

Specification

Supply air pressure	Clean, dry compressed air, 4~7 bar, 708 LPM minimum
Pump viscosity	50~1000 SUS
Pump output at full stroke	0.033mL (1-drop standard), 0.100mL (3-drop standard)
Pump output rate	0~396mL/hr (1-drop standard), 0~1200mL/hr (3-drop standard)
Air flow rate	0~4 SCFM for each air and oil output, 1~2 SCFM typical
Pulse generator	5~50 pulses/min, Max 200pulses/min(not recommended)
Operating temperature	0℃ ~ +50˚C
Storage temperature	(-16℃ ~ +70˚C)
Fluid reservoir	Customizable, standard 0.5L, 1.0L, 2L, 4L

Nozzles

– MQL system with flexible plastic nozzle
Advantages: It is easy to align the position where spray is needed, and it will not work hardening when repeatedly bent into different shapes. Disadvantages: It is easy to be touched and moved out of position. The output of spray is conical, with an included angle of about 15-20 degrees.
– MQL system with semi-rigid copper nozzle
Advantages: It achieves a good balance between flexibility and rigidity, is easy to bend and mold into a certain shape, and can maintain its shape when subjected to moderate force impact. Disadvantages: Repeated bending will lead to work hardening, and finally the nozzle body may break. The spray output is conical, with an included angle of about 15-20 degrees.
– MQL system with stainless steel nozzle
Advantages: Good rigidity, not easily bent or deformed, suitable for being placed in a fixed position and expected to withstand high forces. Disadvantages: The output of spray is conical, and the included angle is about 15-20 degrees.

Manuals

View Datasheet - Minimal Quantity Lubrication

Customize Pneumatic Micro Lubrication Device For Saw Machine

JINPINLUB — Wed, 01 Jan 2025 17:48:41 +0000

Feature

– Easy to install and maintain: This micro lubrication system is designed for easy installation and maintenance, allowing for less machine downtime.
– Wide range of configuration possibilities: The minimum quantity lubrication system, with its modular design, can be applied to various industrial applications ranging from simple to complex and can be customized according to needs, regardless of lubrication output port or reservoir capacity.
– Strong adaptability: VG 68 machine tool guide oil but also can work together with fluids of different viscosities within the parameter range for different industrial applications.
– Temperature adaptability: This oil mist coolant system is designed to adapt to extreme temperature changes and ensure stability and reliability in different environments within the operating temperature range.

Specification

Supply air pressure	Clean, dry compressed air, 4~7 bar, 708 LPM minimum
Pump viscosity	50~1000 SUS
Pump output at full stroke	0.033mL (1-drop standard), 0.100mL (3-drop standard)
Pump output rate	0~396mL/hr (1-drop standard), 0~1200mL/hr (3-drop standard)
Air flow rate	0~4 SCFM for each air and oil output, 1~2 SCFM typical
Pulse generator	5~50 pulses/min, Max 200pulses/min(not recommended)
Operating temperature	0℃ ~ +50˚C
Storage temperature	(-16℃ ~ +70˚C)
Fluid reservoir	Customizable, standard 0.5L, 1.0L, 2L, 4L

Application

– Machining center‌: In CNC machining centers, the MQL micro-lubrication system replaces traditional emulsion lubrication, reducing waste liquid treatment and environmental protection issues.
‌- Lathe‌: On lathes, the MQL system reduces the waste of lubricating oil and cleaning problems caused by a large amount of spray lubrication. Through micro-lubrication, the friction between the tool and the workpiece is reduced, and the cutting efficiency is improved.
– Sawing machine‌: On sawing machines, the MQL system replaces traditional emulsion lubrication, improves the working environment, and reduces the problems of poor lubrication and tool wear. ‌
– Aluminum and copper processing‌: The MQL system is used for cutting and sawing of aluminum bars and copper bars, cutting and sawing of various specifications of aluminum and copper ingots, milling of plate ingots, and cutting of profiles after extrusion by extruders. The tool life is extended by 2-3 times, and the processing production efficiency is increased by more than 50%.

Manuals

View Datasheet - Minimal Quantity Lubrication

Micro Precision Spray Lubrication System For Metal Cutting

JINPINLUB — Wed, 01 Jan 2025 17:03:48 +0000

Feature

– Air and oil mixture: minimum quantity lubrication pump can provide a mixture of air and oil that may be used for different application scenarios requiring precise lubrication.
– Adjustment function: Stroke regulator and pulse generator in minimum quantity lubrication pump allow users to regulate the circulation rate and output per stroke of the pump according to requirement, hence accurate regulation.
– Environmentally friendly: The ISO VG 68 machine tool guide oil recommended by the pump has environmentally friendly characteristics, and precise micro-oil mist lubrication can further reduce the impact on the environment.
– High-performance materials: Nozzles of different materials are suitable for different working environments, such as stainless steel nozzles for environments that require high rigidity, while flexible plastic nozzles are suitable for environments that require easy adjustment of direction.

Specification

Supply air pressure	Clean, dry compressed air, 4~7 bar, 708 LPM minimum
Pump viscosity	50~1000 SUS
Pump output at full stroke	0.033mL (1-drop standard), 0.100mL (3-drop standard)
Pump output rate	0~396mL/hr (1-drop standard), 0~1200mL/hr (3-drop standard)
Air flow rate	0~4 SCFM for each air and oil output, 1~2 SCFM typical
Pulse generator	5~50 pulses/min, Max 200pulses/min(not recommended)
Operating temperature	0℃ ~ +50˚C
Storage temperature	(-16℃ ~ +70˚C)
Fluid reservoir	Customizable, standard 0.5L, 1.0L, 2L, 4L

Mounting

1. Installation preparation: Read the operational manual, understand the principles of the minimal quantity lubrication system, component functions, and adjustment methods. Prepare all the tools which may be required for mounting.
2. Installation location: Choose a place close to the machine and easy for operation and maintenance, making sure the minimal quantity lubrication pump is installed horizontally with the liquid storage tank up.
3. Installation method: Fixed by screws at four installation places minimum quantity lubrication system. As for the case magnet installation method is adopted, it needs to be installed in clean and flat installment location.
4. Air connection: Keep the air supply pressure between 4 -7 bar, connect the air supply line through the air filter, and seal the interface.
5. Thin oil filling: Fill in the qualified thin oil to 75% of the volume of the oil tank. In the process of filling, push down the cover to discharge extra air.

Manuals

View Datasheet - Minimal Quantity Lubrication