Pressurized injector – JINPINLUB https://www.jinpinlub.com Lubrication system solution provider Sat, 30 Nov 2024 19:27:01 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.jinpinlub.com/wp-content/uploads/2024/08/JINPINLUB-100x100.png Pressurized injector – JINPINLUB https://www.jinpinlub.com 32 32 MGK-12 Detachable Pressurized Grease Distribution Injector https://www.jinpinlub.com/product/mgk-12-detachable-pressurized-grease-distribution-injector/ Fri, 29 Nov 2024 15:45:15 +0000 https://www.jinpinlub.com/?post_type=product&p=3916 Feature

MGK oil distributor is suitable for lubricant NLGI 000#, 00#, and needs to be used with a positive displacement lubrication pump.
MG pressurized lubricant metering valve discharges lubricant when the lubrication system is pressurized, and the metering valve stores oil inside when the system is depressurized. It is suitable for volumetric periodic lubrication systems.
MGK distributor can quantitatively deliver lubricating oil to lubrication points according to the selected output volume. It is suitable for lubrication systems with working pressure of 1.0-3.5MPa and has high precision.
This metering valve has 10 output volume models, all with M8*1 internal threads, connected to 4mm nylon tubes or copper and aluminum tubes. The metering valve is divided into 3, 5, 10, 20, 30, and 50 according to the output mark, and for the outlet outlet fittings, there are sleeve type and quick plug type options.

Specification

Function principle Pressure relief metering valve
Numbers of Outlets 1~12
Metering quantity 0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant NLGI 000#, 00# grease.
Operating temperature -20 to +80 °C
Operating pressure 0.5~1.5MPa
Material Copper, aluminum
Connection outlet Inlet Rc1/8, Outlet Φ4(Rc1/8)
Outlet fittings Sleeve type, Quick type
Mounting position Any

Principle

When the lubrication pump is working and pressurized, the lube distributor delivers the quantitative lubricant stored inside to the lubrication point. After the quantitative lubricant inside is delivered, it stops outputting, achieving the effect of quantitative and accurate oil delivery every time. After the lubrication pump stops working (depressurization), the main lube pipe is depressurized, the piston of the distributor is reset, and new oil enters the piston cylinder at the same time. After the oil storage is completed, wait for the lubrication pump to work and inject the quantitative lubricant in the piston cylinder into the lubrication point.

Manuals

View Datasheet - MGK Metering Valve
]]> MG2K-8 PDI Metering Injector For Single Line Grease System https://www.jinpinlub.com/product/mg2k-8-pdi-metering-injector-for-single-line-grease-system/ Thu, 28 Nov 2024 16:49:30 +0000 https://www.jinpinlub.com/?post_type=product&p=3901 Feature

Combination: The distributor consists of a metering valve and a junction. You can select the appropriate output and assemble it into an MG2K distributor as needed.
Metering Valve: The MG2 valve meters grease correctly, maintaining a constant and economical feed.
Grease Nipples: MG2K is able to grease 1-12 plural points with one operation of a grease pump.
Material: The body is normally of brass to make it strong and resistant to corrosion.
Operating Pressure: Operating pressure range of 2.5 MPa with a reset pressure of 1.4 MPa.
Discharge Volume: Available in several discharge volumes, like 0.03, 0.05, 0.1, 0.2, 0.3, and 0.5 ml/cycle.

Specification

Function principle Pressure relief metering valve
Numbers of Outlets 1~12
Metering quantity 0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/cycle
Lubricant NLGI 000#, 00#, 0#, 1# and 2#
Operating temperature -20 to +80 °C
Operating pressure ≥2.5MPa
Material Aluminum+Copper
Connection outlet Inlet M10x1/Rc1/8, Outlet Φ4(M8x1)
Outlet fittings Sleeve type, Quick type
Mounting position Any

Installation

Preparation:
Gather tools and materials, including a valve, grease nipples, fittings, and the appropriate type of grease.
Positioning:
Point out where the metering valve is to be installed. It should be an easy-to-reach area for maintenance and operation purposes.
Fittings Connection:
Couple the fittings to the metering valve and the grease lines. Be sure all are properly fit together to avoid leakages.
System Testing:
Install the valve and nipples and then test the system by working the grease gun. Check the system for leaks or improper grease flow.
Final Adjustments:
Check that all components operate properly and that the lubrication system supplies grease as intended.

Manuals

View Datasheet - MG2K Distributor
]]>