Because the lubrication rate is temperature-independent, hence it provides consistent lubrication results.
Maximum Discharge Pressure: SMD lubricators can go up to a maximum of 6.5 bar during the discharge cycle of lubrication.
Transparent Reservoir: SMD lubricators allow the condition or status of the lubricant to be inspected visually.
LED status indicator: SMD lubricators have red, yellow and green LED lights to indicate the status of the lubricator.
Flexible lubrication cycles: SMD lubricators can be set to lubricate for 1 to 12 months.
Multiple lubricant options: If conditions permit, the lubricator can be pre-loaded with lubricants.
Drive options: Depending on the needs of the application, SMD lubricators can be driven by lithium batteries or external power supply.
Sealing: SMD lubricators have excellent sealing and can even work normally in water.

Specification

Lubricants: oil or grease ≤ NLGI #2
Reservoir capacity: 125mL and 250mL
Emptying time: 0.5, 1, 3, 6, 9 and 12 months
Discharge range: 0.3~0.8mL/day
Ambient temperature: -20~60℃
Working pressure: maximum 6.5 bar
Connection thread: R1/4
Longest tube: 3m for grease, 5m for thin oil
Protection level: IP65
Battery: SMD1-BAT (2 CR17505 in parallel)
Storage time: 3 years (20℃)
Full oil weight: 600g (125mL), 800g (250mL)

Applications

Industrial Equipment: SMD lubricators can be applied to various industrial equipment such as motors, fans, and pumps.
Conveyor Systems: SMD applications include conveyors and cranes.
Elevators and escalators are most especially applied in applications where oil lubrication may be required.
Hazardous and Confined Environments: The SMD lubricators perform quite well in remote installations where space is limited, or the environment is hazardous.
Food Processing Industry: Single-point SMD lubricators are applied to the use of the food processing industry in applications where food-grade lubricants are used.

Manuals